Sinoma (Yichang) Energy Conservation New Material Co., Ltd.
Respect, Sincerity and Integrity, Harmony and Efficiency
Add to Cart
Australia Standard 6mm Thick Fiber Cement Board For Tile And Slate Underlay Internal Flooring
We have made fiber cement products over 30 years.
We manufactures three types of fibre cement flooring products which can be used as a substrate to lay tiles, heavy grade vinyl or cork over for use in dry or wet area applications. These products provide a durable, strong and moisture resistant substrate which helps to minimise tile cracking and reduce damage from moisture ingress.
Tile and Slate underlay is an internal flooring underlay sheet . Its main features are:
Tile and Slate Underlay is designed to protect the finished tile floor from movement that occurs naturally in timber, particle board or plywood floors.
Key Features and Benefits
Minimises tile movement reducing the potential for tile cracking.
Resistant to permanent damage from water when installed and maintained correctly.
Premarked for ease of fixing.
Sizes
6mm thick x 1800mm long x 600, 900 or 1200mm wide
1.Specification
|
Thickness |
Width |
Length |
|
24mm |
1220mm |
2440mm |
|
REMARK: We can also supply other specification as the client’s specially requirement |
||
2.Physical properties
The following data are the average tested figures during manufacturing
|
Item |
Index |
Unit |
|||
|
Density |
1.25 |
g/cm3 |
|||
|
Thermal Conductivity |
≤0.29 |
W/(m·k) |
|||
|
Bending Strength |
15.58 |
Mpa |
|||
|
Water Contain |
8.72 |
% |
|||
|
Moisture Movement |
0.183 |
% |
|||
|
Thermal Conductivity |
0.155 |
w/(m·k) |
|||
|
Elasticity Modulus |
6550 |
MPa |
|||
|
REMARK: Please contact our technical department if you need more technical index. |
|||||
3.Safety Capability
|
Item |
Index |
Spection |
|
Asbestos Including |
100% asbestos free |
safe for application |
|
Radioactive |
<1.0 IRa |
safe for application |
|
<1.0 Ir |
safe for application |
|
|
noncombustibility |
A |
the highest grade |
Transportation, Handing and Storage:
Deliver SINOMA Board to the project site in the original, unopened package and store them in fully enclosed space where they will be protected against damage from humidity, direct sunlight, surface contamination and other causes of damage. Handle SINOMA Board carefully to avoid chipping the edges or damaging units in any way. Handling and storage practices should follow the manufacturer’s recommended suggestions at all times.