Sinoma (Yichang) Energy Conservation New Material Co., Ltd.
Respect, Sincerity and Integrity, Harmony and Efficiency
Add to Cart
Red Color Internal Decoration Fiber cement Uv Painting Board
Structure of calcium silicate board:
Thermal insulating decorative composite board is a kind of pre-fabricated wall panel ,which adopts calcium silicate board ,aluminum panel ,MGO, fiber cement ,inorganic resin panel and real stone thin slab as carrier base board with the appearance of granite marble stone imitation grain texture and fluorocarbon finishes ,laminated with insulation boards ,such as EPS ,XPS,PU ,Rock wool , phenolic foam ,combining the decoration material and insulation material into one board, thus featuring with effect of heat insulation ,energy saving, weathering resistance ,light weight ,sound proof.
Technical data of calcium silicate board
| Test item | Performance index | |||
| Thermal insulation decorative board for exterior wall |
Weathering ability |
appearance | No chalking ,no peeling ,no hollowing ,no seepage | |
| Tensile bonding strength Mpa. |
≥0.10.the damaged located in the insulating layer. (≥0.20 for XPS board) |
|||
| Wind load resistance /kpa. | No less than the design value in the project | |||
| Impact strength / J | 10.0 | |||
| Water absorption .g/m2 | Not than 500.(under water for 24h) | |||
| Freeze-thaw resistance | appearance | No seepage crack ,chalking ,hollowing and peeling after 30 loops. | ||
| Tensil strength . Mpa. | 0.10,the damaged located in the insulating layer(≥0.20 for XPS board.) | |||
| Thermal resistance | Conforms to design requirements | |||
| Water tightness | No seepage in the panel protective layer | |||
| Vapor permeability .g/m2.h | ≥0.85.(no requirements for ventilation structure) | |||
| EPS insulation plate | ||||
| Apparent density.kg/m3 | ≥20 | |||
| Thermal coefficient | ≤0.039 | |||
| Tensile strength .Mpa. | ≥0.10 | |||
| Water absorption(v/v) % | ≤3.0 | |||
| combustibility | No less than class B | |||
we can make calcium silicate board with following:
specification:
(1) Surface coating: granite/marble/stone imitation/fluorocarbon/customized
(2) Base board: calcium silicate/fiber cement/customized.
(3) Insulation layer: EPS/XPS/PU/Rock wool/customized.
(4) Structure: stone imitation paint+ calcium silicate +insulation
(5) Applications: exterior wall
(6) Panel size:1220mm*2440mm /cut-to-size.
(7) Waterproof: yes.
(8) Service time: same as wall body
(9) Installation: anchor and mortar.
(10) Advantages: uniformed color, light weight, low cost.
A ideal substitute for natural stone.
A good combination of decoration and insulation.