Sinoma (Yichang) Energy Conservation New Material Co., Ltd.
Respect, Sincerity and Integrity, Harmony and Efficiency
Add to Cart
Lightweight Calcium Silicate Board For Interior Wall Paneling
Description:
Calcium silicate board is an asbestos-free thermal insulation product that can withstand continuous operating temperature from 650C up to 1100C. It is light weight, low thermal conductivity, high strength, easy to install, reliable and durable. There are 3 grades available namely 650 &1000 & 1100 which are commonly used as furnace backup insulation in steel, petrochemical, ceramic, cement & glass industry or fire protection in building construction. It not only provides energy saving, also increases production efficiency and gives personnel protection in industrial safety aspect. And in the housing construction Calcium Silicate Board is also used as the ceiling, fireproof and heat insulation materials of wall and sound absorption materials of decoration.
Product Feature
1 100% Non-asbestos,environmental friendly;
2. Fireproof,waterproof and humidity resistance
3. Moisture preserving,thermal insulation and energy saving;
4. Lightweight and earthquake resistance
5, Good property of sound-absorbing and sound insulation;
6. Easy installation
| Physical/ Mechanical Properties: | ||
| Size | Standard Size | Size:1220*2440*6/8/9/10/12/15/18mm |
| Appearance | Surface | Surface:Un-Sanded/Sanded/Polished; |
| Edge | Square/Recessed | |
| Density | 1.25-1.35g/cm3 | |
| Moisture Movement | <0.25% | |
| Moisture Content | <10% | |
| Physical Properties | Thermal Conductivity | ≤0.2 w/(m •k) |
| Non-combustibility | GB 8624-2006 Grade A1 Grade | |
| Application | Interior Ceiling and patition wall of all kinds of civil building, renovation of old building,ceiliing and baseboard in the clean room of medical buidling,surgery room,clean room for medical production,research laboratory etc.... | |
| Executive Standard | JC/T 564.1-2008 Fiber reinforeced calcium silicate board,first part: calcium silicate board with non-asbestos | |
| Remark: 1. The above mentioned just prescribe the range. The actual specification can be selected according to construction module among the specified range 2. Other specfication can be produced according to contract upon request. |
||
| Flexural Strength | ||||
| Strength Grade | Density 0.8g/cm3 | Density 1.1g/cm3 | Density 1.3g/cm3 | Aspect intensity ratio |
| II | 5 | 6 | 8 | |
| III | 6 | 8 | 10 | 58% |
| IV | 8 | 10 | 12 | |
| V | 10 | 14 | 18 | |